Page 9 of Steel Pipe News

The Layout of the Pipe

The Layout of the Pipe

  • Nov 26, 2021
  • Hits: 14

1. General requirements for pipes (1) The headroom, aisle width, and foundation elevation of the pipeline's layout should comply with the requirements in Chapter 3 of the "Design Engineering...

read more


The Flow Rate Control of the Oxygen Pipeline (Part Two)

The Flow Rate Control of the Oxygen Pipeline (Part Two)

  • Nov 18, 2021
  • Hits: 11

3. The higher the working pressure of the oxygen is, the greater the danger and the lower the maximum allowable flow rate become. The working pressure is divided into 6 kinds in Table 1:...

read more


The Flow Rate Control of the Oxygen Pipeline (Part One)

The Flow Rate Control of the Oxygen Pipeline (Part One)

  • Nov 08, 2021
  • Hits: 15

The control of the maximum allowable flow rate of oxygen in the oxygen pipeline is a very important issue for safety. When the flow rate is too fast, the temperature of the oxygen pipeline will rise due...

read more


The Safe Use of Oxygen Pipes

The Safe Use of Oxygen Pipes

  • Oct 25, 2021
  • Hits: 8

Attention should be paid to the following aspects to use the oxygen pipeline safely: (1) The oxygen pipeline should be checked and maintained frequently. Carbon steel pipes should be derusted and painted...

read more


Construction Requirements for Oxygen Pipelines (Part Two)

Construction Requirements for Oxygen Pipelines (Part Two)

  • Oct 18, 2021
  • Hits: 13

3. Requirements for pressure and air-tight tests After the oxygen pipeline is installed, pressure and air-tight tests should be conducted to verify the strength and sealing of the pipe....

read more


Construction Requirements for Oxygen Pipelines (Part One)

Construction Requirements for Oxygen Pipelines (Part One)

  • Oct 09, 2021
  • Hits: 32

The construction of oxygen pipelines should not only comply with relevant national standards for construction of the pressure pipeline but also special safety regulations, such as...

read more


The Selection of the Valve for the Oxygen Pipeline

The Selection of the Valve for the Oxygen Pipeline

  • Sep 23, 2021
  • Hits: 12

A valve is an important device on the oxygen pipeline and it is also a frequent source of accidents. Therefore, the selection of the oxygen valve should be very careful. The dedication...

read more


Selecting Pipe Fittings for Oxygen Pipelines

Selecting Pipe Fittings for Oxygen Pipelines

  • Sep 03, 2021
  • Hits: 16

1. Selection of elbows, reducers and tees on oxygen pipelines The elbows, reducers, and tees on the oxygen pipeline are parts that are prone to oxygen flow impact and severe friction. Some impact...

read more


The Material Selection of the Oxygen Pipeline

The Material Selection of the Oxygen Pipeline

  • Aug 30, 2021
  • Hits: 182

The material selection of the oxygen pipeline is a vital safety factor. As the working pressure and flow rate of oxygen pipelines increase, the pipeline's materials have also developed...

read more